Hello,
I'm designing a product using INT035TFT LCD module. Could you tell me the part number of 40pin connector on INT035TFT module? I can find the interface description in its datasheet, but the datasheet don't show the connector part number. From its mechanical drawing, looks there is a PCB footprint for 0.5mm pitch 40pin connector one the back side of module, but no real connector soldered on that footprint, right? Please show me the photo of the back side of module.
Another question is about pin37/39/40 which are for BL control. but in interface description form, the description of these pins are "No connection". Does that mean the module has inside BL driver, so no need external BL driver?
B.Regards
Hi @Roy Shen,
The INT035TFT module has a 45-pin connector, FH12-45S-0.5SH(55). It is listed as a recommended mating connector in the DT035BTFT display datasheet, here. However it is not listed on the INT035TFT datasheet. We will make a note to add it on the next revision and appreciate you bringing it to our attention.
The connector is indeed installed on the board as you can see in the photo below:
As for your question regarding the backlight pins, it appears that this is also a mistake on the datasheet. I have attached the correct pinout and apologize for the confusion.
Hope this helps!