Hi! After reading the specifications, I noticed that although it lists 2.8v as the typical voltage for the display, it lists 3.3v as the maximum VCC voltage for the DT028CTFT. However it also lists 4.6v as the absolute maximum. Is it possible to drive the DT028CTFT display with 3.3v without damaging or degrading it? Or do I need to step down the voltage to 2.8v.
Thanks in advance
Oskar
Hi Oskar- we have a number of customers that operate at 3.3V which is the MAX listed for the module. If you operate at 3.3V with a tolerance, please understand that you may not see issues but you may also void the warranty.